Awesome Nerf Mod: Connect Your Nerf Guns
Intro: Awesome Nerf Mod: Connect Your Nerf Guns
I got to borrow a camera for this instructable:D borrowed being the key word:( This Nerf mod will show you how to connect your Nerf guns. It is very simple and easy to make. It also is not permanent so you can change it whenever.
STEP 1: Materials
You need:
-Both Nerf Recon attachments (laser and flip up sight)
-Hot glue gun
-Screwdriver(s)
-Both Nerf Recon attachments (laser and flip up sight)
-Hot glue gun
-Screwdriver(s)
STEP 2: Take It Apart
Unscrew the laser. Take out the part that connects to the rail. Unscrew the yellow piece. Take off the sight like in the picture.
STEP 3: Glueing
Hot glue the black piece to the base of the sight. Make sure you are careful and let it heat up first.
STEP 4: Finish
After it dries, put it on the gun. I attached my Maverick to my Recon, but I am not sure how much weight it can hold. Also, look at the yellow part of the above picture.
28 Comments
wolf112 10 years ago
i would like to say it is going to get moved around a lot from pumping
coppa_ggrdlsm2uj8j 8 years ago
Ya true. But I tried it with other guns and it worked great.
Dr MonkeyMan 10 years ago
chanciehomemaker 10 years ago
scout117 11 years ago
seanthesheep101 12 years ago
16kuokhc1 11 years ago
sub893 12 years ago
Elemental314 12 years ago
It's like a death machine now!! Then I got bored and attached my RECON to my stapede! (Note: recon wasn't with the shoulder pad when I put it on my stampede.)
nerf-freak 12 years ago
sub893 12 years ago
Zcbohor 12 years ago
sub893 12 years ago
beechcraft18 12 years ago
sub893 12 years ago
beechcraft18 12 years ago
sub893 12 years ago
sub893 12 years ago
seanthesheep101 12 years ago
seanthesheep101 12 years ago