BAMBOO SKEWER SHOOTER!!
Intro: BAMBOO SKEWER SHOOTER!!
FUN, SINMPLE, AND EASY TO MAKE
This is a cool toy than can shoot a bamboo skewer over 30 feet. Mine went exactly 33 ft (yes i measured :). It can be dangerous and might draw blood if shot at bare skin. This instructable will cost you only about $3.00, but most people already have the materials in their homes. This is a fun toy to use in target pratice. Sorry for any bluriness in the photos.
P.S. this is my first instructable, so go easy on the comments.
This is a cool toy than can shoot a bamboo skewer over 30 feet. Mine went exactly 33 ft (yes i measured :). It can be dangerous and might draw blood if shot at bare skin. This instructable will cost you only about $3.00, but most people already have the materials in their homes. This is a fun toy to use in target pratice. Sorry for any bluriness in the photos.
P.S. this is my first instructable, so go easy on the comments.
STEP 1: Gather Materials
The materials nedded are:
1) Bamboo skewers (more skewers, more ammo)
2) Needels (the same amount of skewers)
3) Tape, i used scotch tape cuz thats all i had but duct tape works best.
4) A two liter bottle (the avarage poland spring/deer park water bottle will work too).
5) One medium sized rubberband
6) blade/knife
7) scissors
8) paper and a marker for the target (optional)
1) Bamboo skewers (more skewers, more ammo)
2) Needels (the same amount of skewers)
3) Tape, i used scotch tape cuz thats all i had but duct tape works best.
4) A two liter bottle (the avarage poland spring/deer park water bottle will work too).
5) One medium sized rubberband
6) blade/knife
7) scissors
8) paper and a marker for the target (optional)
STEP 2: "the Launcher"
Take a knife or blade and cut a slot at the top of the bottle (about an inch or two fron the mouth piece).
Then using the scissors cut around the bottle (place the scissors in the slot to help you cut the bottle). Throw away the bottom part of the bottle and keep the mouth piece part.
Cut the rubberband so you'll have one long piece. Using tape add the ruberband (tape both ends to the mouth piece). Please refer to the photos for help.
STEP 3: The Ammo
Take the bamboo skewer and tape a neeedle to the tip of it. Make sure it is taped well or else the needle will come out. The needle adds weight to the skewer so it can go farther. It's also used to "stick" to your target better. Your bamboo skewer shooter is now ready for firing!
STEP 4: Firing the Skewer
Take the skewer and place it trough the mouth piece as shown in the picture. the needle should be facing toward your target, which shoudn't be living creatures by the way. Hold the skewer and the rubberband together, pull back as far as the rubberband can go and FIRE! Let go of the rubberband and the skewer should have stuck to you target. HAVE FUN.
23 Comments
lone panda 8 years ago
so great i shot a stuffed koala, a tip to make your arrows stronger is two use two needles on one arrow
PotatoCoffee 12 years ago
northernmagnet 13 years ago
Paintballer98 13 years ago
timekiller 16 years ago
mbainrot 13 years ago
northernmagnet 13 years ago
northernmagnet 13 years ago
imbored 15 years ago
mattyts 15 years ago
sharlston 15 years ago
lycoris3 15 years ago
imbored 15 years ago
jayro707 15 years ago
jayro707 15 years ago
lemonhead47 15 years ago
Torren101 15 years ago
Mr. Bean117 16 years ago
Crakur 16 years ago
lifelong-newbie 16 years ago