Introduction: B.Z.A.R.
Features:
- Size: 15.2" x 5.9"
- Range: ~ 30-40 ft.
- Accuracy: Consistent
- Pc. Count: Med. High
- Mag Size: 7 (11 with extended mag)
Step 1: Handle and Trigger
This is my all new handle, designed with comfort in mind.
1. Build these.
2. And these
3. Attach here.
4. Add the final layer.
Step 2: Chamber
This is the camber, where the bullets go into the gun, and where the mag attaches.
1. Build these.
2. Add these.
3. Put it together.
4. Attach here.
5. Add this.
Step 3: Body and Barrel
This is the body and barrel. The barrel is integrated into the body, providing more accuracy.
1. Build these.
2. Put it on.
3. Add third layer.
4. Add this.
5. Attach here.
Step 4: Mag
This is the speedloading removable mag.
1. Build these.
2. Put these on.
3. And finish it off.
Step 5: The Rest
Sight, Ram, And Mag Push
Sight:
1. Build it.
2. Put these in.
3. Put it on here.
Ram:
4. Build it.
5. Put it in Here.
Mag push:
6. Build it.
7. Put it in here.
Step 6: Bands
Where to put bands.
1. Here
2. Here
3. And Here
Step 7: Loading
How to load and fire the gun.
1. Pull down the pusher, and insert a rod.
2. Hold the bullet here.
3. And push it in. (load seven)
4. Once loaded, clip in this side of the mag.
5. And then this side.
6. Now pull out the pin.
7. Now pull back the ram, to cock it.
8. And pull the trigger to fire.
Step 8: Finished!
Special Thanks To:
- Me
- My brother
- NikAwesome
- Me
- My Dog
- The Tick
- And Finaly, Me.
- Shoot your friends
- Shoot your relatives!
- Shoot a stranger
- Rate it five stars
- Stop a terrorist attack
- Add it as a favorite
- Build my other guns
- Subscribe to Me
Be the First to Share
Recommendations
Cold Challenge
Block Code Contest
Clocks Contest
54 Comments
10 years ago on Introduction
I broke one of the white connectors like in step 1 BEFORE I built this
Reply 4 years ago
Me too ( and not just one either )
10 years ago on Introduction
can you put bbs in the mag?
11 years ago on Introduction
i know what b.z.a.r. stand for big z's assault rifle
13 years ago on Introduction
good gun!
but the gun isn't good for long range shots
4,5#
Reply 13 years ago on Introduction
Thanks man! Try putting a couple more bands on for extra range, it can handle a fair amount of pressure.
Reply 12 years ago on Introduction
i made iron sights mad beast u have pistol sights or rifle by one attachment
Reply 13 years ago on Introduction
lol i cant get the ramrod in place with 6 rbs
Reply 13 years ago on Introduction
ok
12 years ago on Introduction
Actually, you could make a stock that slots into the bottom of the handle if you make it completely hollow in there, and have the grey two-slot be a yellow to attach it firmly.
12 years ago on Introduction
Made one; I now have a slightly oversized pistol-I only made it to the mag and a white and red past that so it has some accuracy. Great range, but I'm almost out of parts to use as ammo due to mag size.
12 years ago on Introduction
oh btw my old account was jackdb1998
12 years ago on Introduction
today was the sad day when i had to take this apart :( :( :( :(. ive made better things like the ZLG, The MeZak oodamo pistol and the ZKAR (all off KI)
12 years ago on Introduction
How did I miss this? Might build soon.
12 years ago on Introduction
nice gun i really want to make it but i dnt hav enough pieces coz i have used them for my V8 engine gonna get more so hopefully i will make it then anyway great gun. 5*
13 years ago on Step 2
awesome chamber, this boosts my rating.
13 years ago on Step 8
best gun that I've made!!! I have been looking for a gun with a mag like this for weeks
Reply 13 years ago on Step 8
me too
Reply 13 years ago on Introduction
Thx, i'm glad you found one!
13 years ago on Introduction
ive recently been running low on knex pieces cos i have used loads on my new chain gun turret and i have taken apart nerly all of my other guns but i refuse to dismantle this bcos its just sooooo gooood!
if u havnt made it yet then make it now