Ball Machine Elements

by knexknexknexknex

2.4K94

Intro: Ball Machine Elements

STEP 1: Flipper

Collect these pieces: 3 blue spacers 3 orange connectors 2 white/snowflake connectors 12 short green/black connectors(shortest axels) 4 blue/purple axles 12 gray/purple connectors(I don't know what to call them) 4 red connectors 20 white axles

STEP 2: Flipper

Build this. You need 2 of them

STEP 3: Flipper

STEP 4: Flipper

Build this

STEP 5: Flipper

Almost done

STEP 6: Flipper

Final step. Just attach it on and put a ball on it should flip and drop on the other side

STEP 7: Curve Track

Very simple you probably don't need instructions

STEP 8: Switch

Switch. You probably don't need instructions

STEP 9: Roller Coaster Track

Simple. Until an axle runs out

STEP 10: Bendy Track

Uses bendy pieces. Good for turns. Not for wide turns or sharp turns. Last pic: it should turn at about that angle

STEP 11: Spiral Stairs

Pieces: (Recommended) 11 yellow axles 13 end connectors 10 red connectors

STEP 12: Spiral Stairs

You can change the lengths of the axles if you want

STEP 13: Ferris Wheel

Simple

STEP 14: Dropper

Attach a piece so it stays horizontal until a ball falls on it

STEP 15: Dropper

That's all for now. More to come

4 Comments