Basic Hovercraft
Intro: Basic Hovercraft
This simple project gets you started with a basic inexpensive construction of a hovercraft. Parts include:Hair dryerParty TrayHot glueWireBattery 18V Dc cordless drill.
http://www.youtube.com/watch?v=08RtzUFERr8
http://www.youtube.com/watch?v=08RtzUFERr8
STEP 1: Parts & Tools
Party Tray $3.50 from local store. I used the 16 inch party tray. Hair dryer motor $5.00 from Goodwill. I removed the motor from the hair dryer. Tools include a hot glue gun, torch, wire, and soldering iron.
STEP 2: Step 1 Cutting Hole in Center of Tray.
I placed a metal container lid in the center of plastic tray and heated it up with the torch. It melted a perfect hole through the plastic.
STEP 3: Step 2 Mounting the Motor.
I used hot glue to attach hair dryer motor to bottom of party tray and extended wire connections with wire and soldering iron. I connected the battery to the wires and we have lift off.
8 Comments
palombo5050 10 years ago
One more
palombo5050 10 years ago
Advance Hovercraft
palombo5050 10 years ago
I made a little change to the basic Hovercraft
https://www.instructables.com/id/Advanced-Hovercra...
palombo5050 10 years ago
Check out the new youtube video
Kiteman 10 years ago
Could we see it running?
palombo5050 10 years ago
Here is the youtube link.
the crafting guy 10 years ago
palombo5050 10 years ago
Good idea on the Frisbee. .. I didn't have a frisbee on hand. I used a leftover party tray from New Years.