Basic Knex ACOG Scope
Intro: Basic Knex ACOG Scope
This is my very basic K'nex ACOG scope, inspired by Modern Warfare. It's mainly built from broken red connectors but is pretty good at it's job
Pros:
Good looks
Simple
Adjustable M16-style reticule
Good visibility
Cons
Not a real ACOG (yet)
needs many broken parts, which can snap when built
Check out my new ACOG v2, inspired by Trijicon's TA01NSN-RMR series!
Pros:
Good looks
Simple
Adjustable M16-style reticule
Good visibility
Cons
Not a real ACOG (yet)
needs many broken parts, which can snap when built
Check out my new ACOG v2, inspired by Trijicon's TA01NSN-RMR series!
STEP 1: Parts List
this is what you need:
8x red connectors
6x yellow/graphite rods
6x dark grey connectors
6x tan clips
1x ball joint (may be wrong, so just look at the pictures)
1x black hinge
2x blue spacers
and anything you want to add to it
8x red connectors
6x yellow/graphite rods
6x dark grey connectors
6x tan clips
1x ball joint (may be wrong, so just look at the pictures)
1x black hinge
2x blue spacers
and anything you want to add to it
STEP 2: Body
make the ACOG's body
1) first, you'll need to attach the broken red connectors to the rods as shown
2) repeat at the other end
the broken red connectors are designed to increase visibility down the scope. This allows a greater chance of seeing your target in combat
1) first, you'll need to attach the broken red connectors to the rods as shown
2) repeat at the other end
the broken red connectors are designed to increase visibility down the scope. This allows a greater chance of seeing your target in combat
STEP 3: Sight
This is a simple step.
1) attach the ball joint piece at one end of the scope
2) attach the hinge joint at the other, behind the red connectors as shown
These additions allow you to aim properly at your target
1) attach the ball joint piece at one end of the scope
2) attach the hinge joint at the other, behind the red connectors as shown
These additions allow you to aim properly at your target
STEP 4: Rails
This step allows you to attach the scope to other K'nex guns.
1) attach the tan clips
2) attach the grey connectors and link to the tan clips (as shown)
3) slide the graphite rod in
4) secure the graphite rods in place.
The rails allow you to attach the scope to any K'nex gun with little modding
1) attach the tan clips
2) attach the grey connectors and link to the tan clips (as shown)
3) slide the graphite rod in
4) secure the graphite rods in place.
The rails allow you to attach the scope to any K'nex gun with little modding
STEP 5: Now You're Done!
Have fun with this simple ACOG scope!
If you want to suggest any modifications don't hesitate to comment or mail me
KnexPete :-)
If you want to suggest any modifications don't hesitate to comment or mail me
KnexPete :-)
14 Comments
altair ibn la ahad 13 years ago
knexpete 13 years ago
Dante9030 13 years ago
almighty caz 14 years ago
knexpete 14 years ago
TigerNod 14 years ago
knexpete 14 years ago
TigerNod 14 years ago
~KGB~ 14 years ago
knexpete 14 years ago
~KGB~ 14 years ago
knexpete 14 years ago
im planning on making an actual ACOG with a laser in 2 weeks time, and i'll try to use ur suggestion
~KGB~ 14 years ago
ShadowChaosControl 14 years ago