Beer Holder for the Shower

It's somewhat of a tradition here in our house to shower with a beer (separately) before we head out to party on the weekend. After doing it for quite sometime we got sick of having to drink the water that would find its way into our beer (because we had no place to put it but the ground). To fix this problem our good friend Greg came up with a genius way to have a beer holder for the shower.

What you need:
1 - Cup holder (found at any car parts store)
1- Suction Cup (found at local hardware store)

This instructable is featured on www.askacollegekid.com

Step 1: Break the Cup Holder Hanger

In order for it to fit snug in your shower you need to remove the "hanging" part of the cup holder. This can be down using man power or if you or going to be smooth about use some type of cutter that will cut through plastic.

This instructable is featured on www.askacollegekid.com

Step 2: Add Suction Cup

Okay, now you just need to add the suction cup to the back. There was already holes in the cup holder we got from the store,b ut if not just drill a hole though so you can attach the suction cup.

This instructable is featured on www.askacollegekid.com

Step 3: Hang It Up, and Have a Beer!

Stick that thing to your shower, crack open a beer, and place it inside. Enjoy!

This instructable is featured on www.askacollegekid.com