Benfoxg's Best Knex Gun. the M2 Carbine.

by benfoxg

5.1K747

Intro: Benfoxg's Best Knex Gun. the M2 Carbine.

Here it is! this is the same gun as my first, but it has been update extremly. I'm not going to do a version history, because its way to long.

parts list. omg.

connectors:
yellow:118
green:10
red:22
blue 3d:9
white:9
orange:29
dark grey:2

rods:
green:119
white:70
blue:58
yellow:8
yellow bendy:5
blue bendy:7
grey bendy:2

other:
y hands:4
blue clips:1

warning. shoots 130 feet (wow)

STEP 1: Front Barrel

needed to house the rubber bands and the be a barrel

1:what your making
2:make these
3:connect
4:add yellow and red buddies

STEP 2: Main Body

Needed to hold the gun together and to be a body (no 6 pack included)

1:what your making
2:make 2
3:do and make all of this
4:add
5:connect

STEP 3: Exo-frames

A new thing! strong exo frames! need so the gun doesn't make a big crunch noise and stop working.

1:makeith 2

STEP 4: Little Parts

A very long yet easy step. make the gun work

1:make
2:make
3:make
4:make
5:make
6:make
7:make

too.....many.......makes!@!@!@!@!@

STEP 5: Mag

fake but can be modded to hold extras. need to make it look like an m2 carbine

1:what your making
2:make 2
3:add to one
4:connect and donerony!

STEP 6: Stock/handle

Needed to be able to hold teh gun.

1:what your making
2:make 2
3:make 3
4:connect
5:connect and you know what

STEP 7: All Together

need to have the gun...lol

0:all the parts
1:front to body
2:exoframe to body
3:thing to body
4:thing to body
5:thing to body
6:thing and mag to body
7:handle/stock to body
8:thats one bad@** rifle you got there buddy!

STEP 8: Loading

how to loa. hot glue is needed. tape will not work nearly as well. be carefull not to burn yourself, it hurts!

1-2:bullet. for make preformance, make tape or paper fins.
3:hot glue on green piece
4-5:loading

how to shoot: PULL TEH TRIGGAA!!!!!!!!!!!!!!!!!!!!!!!

47 Comments

LittleBilly 7 years ago

This should be in the knex category. I found it in the Lego section

FuNbOy77 12 years ago

Do u only need 1 of those little black things for the whole gun??

SteampunkManiac 13 years ago

FAAAAAAAAAAAAAAAAAAA(3 days later)AAAAAAAAAAAAAAAAAIIIIIIIIIIIIIIIIIIIIIIIILLLLLLLLLLLLLLLLLLLLLLl!!!!!!!!!!!!!!!!!!!

lowe 14 years ago

I added a saftey switch that you cann turn on and off with a little dial.

The Great Knex Warrior 15 years ago

SUPERB RIFLE! try making the same gun but with a working magazine and a ram. it probably wont be as powerful but it would make it look even more realistic!

The Great Knex Warrior 14 years ago

looks quite good!!!
i made a new sniper rifle, didnt have much pieces but:
it has 2 wheels in the stock to give it weight as i didnt have enough pieces. don't know how far it shoots yet but it can shoot through thick cardboard and come out the other side only a small bit slower.

tthomasvd 14 years ago

is that down that that yellow pice what is zoomet in a black round or an blue??

DIRTRACER39 15 years ago

I'm sure this is a amazing gun if it can shoot 130 feet, but i can't figure out how to build it, the pictures are to blurry and not descriptive enough, because of that only 3.5*

I_am_Canadian 15 years ago

Try wiping all the condensation off the camera lens and try again. Nice gun though.

benfoxg 15 years ago

if u like it please rate sum1 attacked this thing's rating. 1 0.5 star brings it to 2.7, it deserves more than that. and I'm getting good comments. its not a block trigger

happybirthday 15 years ago

it uses the spriani firing system. ill have it up by tommarow

happybirthday 15 years ago

really all i did was only hot glue the front and when you fired, the dark grey at the back would fly up

benfoxg 15 years ago

kool, a vid if possible?
More Comments