Bicycle Inner Tube Phone Wallet Holder

1,543

14

6

Introduction: Bicycle Inner Tube Phone Wallet Holder

This holder works for phones with or without case. I use this holder for my minimalist wallet. You can also use this holder for credit cards and keys.

Step 1: Tools & Supplies

  1. Bicycle inner tube (of 2.2" MTB tire)
  2. Scissors

Step 2: Cut the Inner Tube

  1. Cut approximately 0.5 mm of the inner tube. You'll need two of these.

Step 3: Assembly

  1. Loop one of the inner tube crosswise from the corners; upper left corner to lower right. First croswise loop will serve as a base grip which will prevent slippage. It is especially useful for the phones/cases with slick surface.
  2. Do the similar for the other corners. That's it.

Notes

Loops do not affect the functionality of the buttons (with or without case).

Be the First to Share

    Recommendations

    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge
    • Unusual Uses Contest

      Unusual Uses Contest
    • Edible Art Challenge

      Edible Art Challenge

    6 Comments

    0
    Matlek
    Matlek

    3 years ago

    Nice project, simple but very useful!

    0
    _silop_
    _silop_

    Reply 3 years ago

    Thank you

    0
    Penolopy Bulnick
    Penolopy Bulnick

    3 years ago

    Clever and it looks like a fun phone decoration when it's on its own too :)

    0
    _silop_
    _silop_

    Reply 3 years ago

    thanks, I like diys even more when they look good.

    0
    _silop_
    _silop_

    Reply 3 years ago

    thanks, I like diys even more when they look goo