Bike Trailer Hitch

18,710

29

1

Introduction: Bike Trailer Hitch

 For the bike contest, I made a bike trailer hitch. It is 1/2 inch, and attaches to any bike. It can tow almost anything, if you have the trailer for it and the leg strength.
I made it in solidworks. The part that i made is in the second picture. It is a trailer hitch that is designed for a bike.

the kayak,bike, and trailer frame is from GrabCad.

Be the First to Share

    Recommendations

    • Tinkercad to Fusion 360 Challenge

      Tinkercad to Fusion 360 Challenge
    • Build a Tool Contest

      Build a Tool Contest
    • Fruits and Veggies Speed Challenge

      Fruits and Veggies Speed Challenge

    Comments

    0
    hazzalandy
    hazzalandy

    8 years ago on Introduction

    I built something very similar to that, the issue I had with it was getting the rear axle nuts tight enough to adequately support the weight of the trailer. I solved the problem by extending the legs of the hitch to the pedal spindle and attaching u bolts around the rear forks. I lined the inside of it with innertube for extra strength.