Blow Dart




Introduction: Blow Dart

This is an incredibly effective blow dart, its pretty fast to make and flies beautifully.

Step 1: Materials

All you need for this is a piece of a milk carton, a lighter, a nail, and something to mold it on, I found that a highlighter case makes a great dart for 3/4" pvc.

Step 2: Melt the Jug

You want to make the milk jug material go see through, slowly move the piece above the flame, dont let the flame touch it.

Step 3: Form the Tail

Push the see through area over the highlighter tube, be careful not to break the jug material.

Step 4: Cut Out the Tail.

Cut around the bottom of the mold.

Step 5: Insert the Nail

Push the nail through tail.

Be the First to Share


    • Raspberry Pi Contest

      Raspberry Pi Contest
    • Photography Challenge

      Photography Challenge
    • One Board Contest

      One Board Contest



    11 years ago on Introduction

     I like this method, but after using the darts a bit, the plastic actually tore on multiple darts... is there any way to make it stronger? different plastic maybe?


    12 years ago on Step 2

    I use to make darts this way years ago except for two things. Both I believe to be an improvement. The first is using the pointy end of a plumb bob. either the brass or the steel ones work because of the perfect cone shape. the second thing is we used spokes from old bicycle wheels. they can be sharpened to the extreme and they can be longer.


    12 years ago on Introduction

    dude i tried that and it took me alot of tries to get it right but I used finising nails because there smaller.