Blu Ray Glow in the Dark Image Drawing Robot
Intro: Blu Ray Glow in the Dark Image Drawing Robot
All these things should be fairly simple for the experienced user.
Step 1, Get a pololu maestro board and two servo motors, glue them together to make a turret.
Step 2, Add a 100mW blu ray laser to the turret, and paint a sheet in Glow Inc paint
Step 3, Do some basic trigonometry and figure out how to light up a "pixel" on the canvas
Step 4, Code it up in C#.net
Step 1, Get a pololu maestro board and two servo motors, glue them together to make a turret.
Step 2, Add a 100mW blu ray laser to the turret, and paint a sheet in Glow Inc paint
Step 3, Do some basic trigonometry and figure out how to light up a "pixel" on the canvas
Step 4, Code it up in C#.net
8 Comments
Fireater989 13 years ago
imont 10 years ago
TAz00 10 years ago
The wiring is pretty straight forward when dealing with servos. The only thing that matters is getting the signal wire (white/yellow) to the signal output on the meastro.
imont 10 years ago
imont 10 years ago
wild1357 13 years ago
phevtron 13 years ago
suicidal.banana 13 years ago