Build Your Own Mini Disco Ball! Groovy!
Intro: Build Your Own Mini Disco Ball! Groovy!
Here is a cheap way to build a mini disco ball and recycle those annoying AOL CD's at the same time! Watch my (Kipkay) video and see it all come together!
STEP 1: What You Need...
1. A bunch of useless internet CD's, like the AOL CD's you get in the mail.
2. A Small styrofoam ball
3. A glue gun and scissors
4. Fishing line or thread
5. A wooden skewer or coat hanger
2. A Small styrofoam ball
3. A glue gun and scissors
4. Fishing line or thread
5. A wooden skewer or coat hanger
STEP 2: Say Bye Bye to the CD's...
Cut 'em up into small random square shapes...
STEP 3: You Should Cut Up a Whole Lot...
Careful...these can be sharp...
STEP 4: Putting It All Together...
Start hot glueing the pieces to the styrofoam ball. Work your way around until it is completely covered. Then using the skewer or coat hanger, run a hole through the middle, run some thread through the hole and either tie a big knot in the end or hot glue a button on the end. Hang it up and fire up your disco records! Have fun!
33 Comments
christian2927 14 years ago
airsoftjim123 14 years ago
sjs229 14 years ago
https://www.instructables.com/id/CD-disco/
PLEASE RATE IT
hyperactiveguy 15 years ago
mman1506 15 years ago
necropolian 15 years ago
hyperactiveguy 15 years ago
james.mcglashan 15 years ago
james.mcglashan 15 years ago
hyperactiveguy 15 years ago
girrrrrrr2 16 years ago
marc92 16 years ago
Sandisk1duo 15 years ago
Plasmana 15 years ago
hyperactiveguy 15 years ago
imthatguy1125 15 years ago
bowmaster 15 years ago
Plasmana 15 years ago
Neurotiker 15 years ago
srhadaham 15 years ago