Building Brass Terminals for Wires.

Brass terminals are hard to buy. But it is easy to build it by your own
Here is a small step by step tutorial.

Step 1: What You Need...

1   brass screw 3 mm / 30 mm
1   telephone jack or another piece of plastic that fits around one knurled head screw
1   brass washer 3mm
2   ring connectors
2   knurled head screws 3 mm

some wires

Step 2: Prepare the Ring Connectors

One ring connector is for the inner cabling of the device. The other one for connecting the devices outside.

Step 3: Solder the Wires to the Connectors

Step 4: Mantle and Mark the Wires

You can mantle the wires with a shoelace and mark it with colored yarn.

Step 5: Prepare the Insulater

The insulator part of the telephone jack needs to be a bit wider to fit over the knurled head screw.

Step 6: Ready to Mount

So everything is ready to mount the terminal into you case.

Step 7: The Cabling Inside

Here you can see the inner cabling.

Step 8: The Mounted Terminal.

Here you can see the complete terminal. The first knurled head screw fits into the insulater of the telephone jack.

Step 9: Everything Connected....