Buzz Lightyear Laser

by wentworthm

1.7K12


Intro: Buzz Lightyear Laser

I built these two items to go along with the Buzz Lightyear Jetpack that I made as my son's halloween costume. These two accessories were mostly 3D printed on my Prusa i3 Mk3 printer. Let me know what you think.

STEP 1: Design and Build

I designed these in TinkerCAD. The designs can be found here (https://www.thingiverse.com/thing:3215029). It was a very simple setup. The wiring was standard 22 gauge wire, a standard LED, pushbutton (any will do) and a 3.7v lipo battery. The battery was salvaged from an old mini drone that I had. Please watch the videos and let me know what you think. To hold the communicator's cover I used zip ties and to seal up the laser and hold the LED cover I used simple super glue.

2 Comments

DIY Hacks and How Tos 5 years ago

This could also be easily modified to be Syndrome's controller from the Incredibles.

wentworthm 5 years ago

If you'd like, grab the files and use them. I can make public my tinkercad files and send you the link if you'd like. I only ask for a shoutout (one mention of my username here) if you do. It was a fun thing to figure out and my son still plays with them.