Introduction: CHINESE WHEEL: CHRISTMAS ORNAMENT
A Chinese wheel is a type of Christmas ornament it can be hung on a tree on a Christmas tree this project is quite easy and affordable all you will need are papers 12 papers and the instruction I hope you can make this project it's quite easy and very fun for the whole family it almost looks like a star but it's a real and if you roll it around it acts like a actual wheel I hope you enjoy this project and please tell me if you've made this and feel free to ask any questions and make any comments. Thank you. Please vote for me
12 pieses of square paper
And your instructions.
Step 1: Step One
Begin with desired color or patterned side down.Mark the middle of the right edge of the paper by folding it in half from the bottom edge to the top edge.
Step 2: Step Two
Make a short pinch fold at the right. unfold
Step 3: Step Three
Mark one cutter divisions with pinch folds by folding the top and bottom edges to the middle pinch mark.
Step 4: Step Four
Fold up the bottom edge to the topmost pinch mark.
Step 5: Step 5
Your paper will look like this. unfold
Step 6: Step Six
Fall down the top edge to the bottom most pinch mark.
Step 7: Step Seven
Your paper will look like this. Unfold and rotate the paper so that the pinch marks are at the top of the paper.
Step 8: Step 8
Fold the left and right top corners to the creases each to the crease nearest to its own side. Be sure to neatly align the edges of the paper to the creases.
Step 9: Step 9
Fold the bottom edge of the square to the bottom edges of the folded triangles. (Leave a small Gap)
Step 10: Step 10
For the bottom rectangle shape in half from the bottom edge to the top edge.
Step 11: Step 11
Unfold the bottom layers.
Step 12: Step 12
Neatly fold the bottom edge to the first crease from the bottom.
Step 13: Step 13.
Bring up the bottom edge to the topmost priest look at step 14 for the desired shape.
Step 14: Step 15
Fold over the two square corners
Step 15: Step 14
Your paper should look like this. Turn the paper over.
Step 16: Step 16
Fold up the bottom edge making the fold run along the bottom edges of the triangle shapes.
Step 17: Step 17
Mounting fold the corner parallel creases banging the left and right side so that the folded unit is square.
Step 18: Step 18
Note that each unit has tabs the square end s and two pockets one on each side you need a total of eight to 12 units to complete the wheel.
Step 19: Step 19
When you have made two units the tabs of one unit will slide into the pockets of the other one on each side.
Step 20: Step 20
Push the units together until they are snug.add each new unit to the pocket and of the growing model until you complete your Chinese wheel.
Participated in the
Holiday Decorations Speed Challenge
1 Person Made This Project!
- oluwatumila-akinsode made it!