Chair Design
Intro: Chair Design
I did the chair because I wanted to copy the chairs of my high school. I thought It will be very interesting to see the small version of it.
STEP 1: Planning
First I sketched the different parts of the chair, then I corralled it all together to see what it was going to look like.
STEP 2: :CHAIR CHAIR BACK
then I opened Tinkercad and picked a curved shape and put two nails in the middle.
STEP 3: BACK HOLDER
Then I picketed another curved shape and another two columns and put them together.
STEP 4: SEATING
I picked a circular shape and then I cut it to be the shape that I wanted to be.
STEP 5: BUTTON HOLDER
I got two other columns and I stuck them at the bottom of the chair seat. Then I connected the top column with the bottom one.
STEP 6: WHEEL SUPPORT
Then I got a X shape and put four balls at the bottom of each ending
STEP 7: LEVER
Then I got another column and put it sideways to make the Lever and then I connected the X with the button of the Chair seat
STEP 8: CHAIR MODEL
Then I just grouped all together. After that I turned it into an STL file to send to the 3D printer.
STEP 9: 3D PRINTER
Then I printed on the 3D printer,and put it in a support cleaning apparatus to remove the support material.
STEP 10: BIG AND SMALL
Then I put the mini chair on top of the normal sized chair to see the difference in sizes.