Intro: Checkers Board and Peices

My name is Calvin and I go to Fairview High School. I made a 8 by 8 Checkers board in fusion 360 including 24 pieces.

STEP 1: Making the Board

In fusion 360 the first step to making a checkers board was to create a and 8 by 8 board of squares. I made 64 different squares and made the ones diagonal to each other the same height and the ones horizontal to each other different heights.

STEP 2: Making the Peices

In order to make the pieces of for the checkers board, I made a 10 mm by 10 mm cylinder and coped it into each position.

STEP 3: Coloring the Board

Coloring the board:

To color the board I chose to make a black and white board. I used the filling tool to change the color. I needed to do this because then it will be an actual checkers board.

STEP 4: Coloring the Peices

I then need to color the pieces so that you won't be confused what pieces are yours and what pieces are your opponents pieces.

STEP 5: Finished Project

This is the final product!