Chinese Crown Knot Cross
Intro: Chinese Crown Knot Cross
The shape of the Chinese crown knot lends itself to this project
STEP 1:
I used 3' of 3/16" cord.
Take the right hand strand over the left
STEP 2:
and make a bight underneath the same cord
STEP 3:
Take the other strand and bring it up underneath three - and down over two and through the bight
STEP 4:
Adjust the bight to the desired shaape
STEP 5:
Take the left hand cord and make a "S" shape
STEP 6:
Bring the end up and down over, under, over the "S"
STEP 7:
Then up under three
STEP 8:
Then down over two and through the bight. Adjust the size of the loop
STEP 9:
Take the right hand cord and make a "S"
STEP 10:
And bring the end up and down over, under, and over the "S"
STEP 11:
Bring the cord up under the three strands of the "S"
STEP 12:
and down over two and through the bight. Adjust the size of the loop
STEP 13:
Bring the right hand cord over . . .
STEP 14:
And make a bight under the other cord
STEP 15:
Bring that other cord up under three
STEP 16:
and down over two and through the bight
STEP 17:
repeat the above steps making two more crowns
STEP 18:
There are many ways to finish.
Leave the ends alone.
Tie any two strand stopper knot