Circuit Playground Express Glove

Intro: Circuit Playground Express Glove

Today I will show you how to make a light glove at home.

STEP 1: Making the Code

First we must make the code for the glove I used make code to create it. This is what it looks like. then download the code to the CPX on your desktop you must have Cplayboot.

STEP 2: Sowing the CPX to the Glove

To connect the Circuit play ground express to the glove we can use embroidery thread

STEP 3: Connecting the Fingers to the Circuit Playground Express

To connect the fingers to the CPX we will use conductive thread which tells the CPX when which finger is touched.

STEP 4: Battery Holder

The battery is needed to charge the CPX I attached it with elastic it is about 1cm wide. I attached it at the back of the glove.

STEP 5: Done

You are done with your project it should work like this in the video.