Commercial Spool Adapter

994

6

8

Introduction: Commercial Spool Adapter

About: hgv driver but only because it pays more than I can make otherwise

This maybe well know in sewing circles, but having found it in my grandmothers sewing machine I thought it was too good an idea not to document and pass on in case it isn't

Step 1: What Is It?

My grandmother was the village seamstress and clearly used a lot of thread we found several commercial sized cones of it in her sewing cupboard. With her sewing machine today I found this one with an adapter to make it work with a standard home sewing machine.

Step 2: How Was It Done

The adapter is very simple. She appears to have taken an empty wooden cotton reel and carved off one lip and trimmed the body of the reel a little to make it a tight fit in a commercial cone of thread

Be the First to Share

    Recommendations

    • Plastic Contest

      Plastic Contest
    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest

    8 Discussions

    0
    BLASTFEMI
    BLASTFEMI

    3 years ago

    So clever! I have a huge rigamorale thing to use for big spools on my macine that is already broken! I'm going to try this! Thanks!

    0
    Tsu Dho Nimh
    Tsu Dho Nimh

    Reply 2 years ago

    You can also use styrofoam spools. Carve them down to fit.

    The old wodden spools are hard to find.

    0
    BLASTFEMI
    BLASTFEMI

    Reply 2 years ago

    Good idea! Thanks for sharing!

    0
    catpers
    catpers

    3 years ago

    I have that machine and the case. It was my grandmother’s. (She died in ‘49.)Any idea how old it is?

    0
    Stan1y
    Stan1y

    Reply 2 years ago

    it's a 99k/k99 produced between 1911&1950 originally just hand crank later with an electric motor a factory/approved dealer conversion to electric was also done. there will be instuctables later on replacing the motor with a modern one cleaning and lubricating the machine it's self and depending on if I'm successful replacing the rotten rubber insulated wires in the original motor to make that work instead of replacing it

    0
    framistan
    framistan

    2 years ago

    Some old machines like that one are worth several HUNDRED dollars!! Check out what they are selling for on ebay if you ever get the idea to trash it. My brother used to search for people pitching them, and then sell them for BIG BUCKS.

    0
    gm280
    gm280

    3 years ago

    Older people have lots of really great stories and ideas as well. We seem to forget about how they didn't have everything we enjoy these days. But they were not lazy and knew how to do with the very least amount. I applaud them.