Compact Knex Gun
Intro: Compact Knex Gun
This is my 1st instructable and also my 1st knex gun.
Highlights:
Shoots white rods
Around 20 Ft. range( with 2 Rubber Bands)
Compact (as the title suggests)
Only uses 30 pieces(Including 2 Rubber Bands and not including mods)
Highlights:
Shoots white rods
Around 20 Ft. range( with 2 Rubber Bands)
Compact (as the title suggests)
Only uses 30 pieces(Including 2 Rubber Bands and not including mods)
STEP 1: What You'll Need
Connectors
10 white
6 green
3 orange
Rods
2 blue
2 green
3 yellow
1 white
Other
2 rubber bands
10 white
6 green
3 orange
Rods
2 blue
2 green
3 yellow
1 white
Other
2 rubber bands
STEP 2: Making All the Parts
Just make all the parts in the pictures. They're all pretty simple.
STEP 3: Putting It All Together
Again, just follow the pictures. Simplicity is fun!
STEP 4: Loading and Firing
To load, pull the yellow rod with the orange connector back and push the white rod on the side up. After you do this, put a white rod into the center hole of the white connectors(the side opposite the yellow rod/orange connector). To fire, push the white rod on the side down.
STEP 5: Mods
Any mods I make, I will post pictures for them here.
Pic 1
I added 12 green rods to the handle. This gives it (in my opinion) a cooler feel.
Pic 1
I added 12 green rods to the handle. This gives it (in my opinion) a cooler feel.
14 Comments
Seleziona 13 years ago
~KGB~ 13 years ago
Ryanisawesome94 13 years ago
dsman195276 13 years ago
Ryanisawesome94 13 years ago
dsman195276 13 years ago
Ryanisawesome94 13 years ago
dsman195276 13 years ago
~KGB~ 13 years ago
RMConstruction 13 years ago
DJ Radio 13 years ago
Vynash 13 years ago
Ryanisawesome94 13 years ago
Vynash 13 years ago