Companion Cube Keychain
Intro: Companion Cube Keychain
Heres an Instruction to make your own Portal Companion Cube Keychain with a 3D Printer.
STEP 1: First: Print.
Ull need a 3D Printer and some Paint.
Print this 3D Model: http://www.thingiverse.com/thing:23899/#files
(Thanks to CarryTheWhat for the Model itself)
Print this 3D Model: http://www.thingiverse.com/thing:23899/#files
(Thanks to CarryTheWhat for the Model itself)
STEP 2: Paint the Deepest First.
Paint the deepest places first.
I used Acrylpaint.
I used Acrylpaint.
STEP 3: Overpaint the Paint Like 3-5 Times
Overpaint the Paint like 3-5 Times until you cant see it anymore.
Be gentle and do it like you would paint over a plate without going under, like you Paint the air over the deeper Places.
(Argh, man. You know what i mean)
Be gentle and do it like you would paint over a plate without going under, like you Paint the air over the deeper Places.
(Argh, man. You know what i mean)
STEP 4: Adding Lines.
Now you need to add the small Lines in the Middle.
I used a TOOTHPICK to do it.
Use something like that and your finished.
Mine is like 4 Months old know.
Thats why it have a nice used-Touch.
I used a TOOTHPICK to do it.
Use something like that and your finished.
Mine is like 4 Months old know.
Thats why it have a nice used-Touch.