Introduction: Covid 19
My cardboard project was a hospital room in icu. Showing a patient with covid 19 and a nurse
Step 1: Step One
First i drew up a scene in a hospital icu room. I drew out everything i would need to cut out.
Then i cut all the pieces i would need to assemble all the furniture and medical stuff n bed and the patient and nurse.
Step 2: Step 2
Next i started to assemble all the pieces and painted them as well.
Step 3: Step 3
Next i assembled the room itself and painted it and started to put my pieces in place in the room
Step 4: Step 4
Next i cut out and painted the nurses hair and clipboard.and put her in place next to patient.
Step 5: Step 5
I put the finishing touches on the nurse and victim. And made sure it was all glued good then i went to work looking for a piece of thin cardboard i could use as a blanket for the patient.
Step 6: Step 6
I finshed everything and drew a mom and daughter looking thru a window into the room.
Step 7: Step 7
I finished andvtook pictures.this is my 1st time doing this so im sorry if my instructions suck! And the project!
Participated in the
Cardboard Speed Challenge