Create a VU Meter and Disco Led Using Raspberry Pi Visual Programming

Introduction: Create a VU Meter and Disco Led Using Raspberry Pi Visual Programming

Create a simple music player with a VU Meter and a disco light. You need:

- 10 LEDS
- A Raspberry Pi model B
- breadboard
- 1 RGB LED
- 10 220Ohm resistors
- jumper wires

You can program it using Wyliodrin at www.wyliodrin.com.



Be the First to Share

    Recommendations

    • Fruits and Veggies Speed Challenge

      Fruits and Veggies Speed Challenge
    • Stone Concrete Cement Contest

      Stone Concrete Cement Contest
    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge

    Comments