Custom Camper Table

Introduction: Custom Camper Table

About: https://www.youtube.com/dustinpenner1

Building a better looking, more stable camper table for a custom Boler trailer. Knotty pine with a "tung oil" finish.

Before and After Contest

Participated in the
Before and After Contest

Outside Contest

Participated in the
Outside Contest

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    5 Discussions

    0
    RichardK47
    RichardK47

    2 years ago

    I just got done making one for my 1978 Rockwood pop-up camper, since the original one (made of sawdust board with a laminate top) was water damaged and crumbling. I used a sheet of 3/4" pre-sanded plywood from Lowe's (traced around the old table for a pattern), rounded the corners with a 1/4" radius corner-rounding bit in my router, and finished with Minwax gloss Polyshades "Bombay Mahogany" (4 coats on top, 2 on the bottom). Re-used the original hardware.

    https://www.flickr.com/gp/68343514@N07/Ppj4We

    0
    DIMyself75
    DIMyself75

    5 years ago on Introduction

    I'm working on restoring a camper myself, could you post what boards you used and what thickness you planed them to, the rest is shown very well in the video, this table would be really cool in my camper, thanks

    0
    dpmakestuff
    dpmakestuff

    Reply 5 years ago on Introduction

    I just matched the thickness and dimensions of the original table. Thanks

    0
    dustin_little
    dustin_little

    5 years ago

    Just a heads up your title says "trailer" not "table"

    0
    dpmakestuff
    dpmakestuff

    Reply 5 years ago on Introduction

    thanks! I was half asleep when I posted this.