DIY Cable Cam

Introduction: DIY Cable Cam

About: Check out my website at Colvins.ca


This is a DIY Cable Cam that I built.  You can read more here: http://colvins.ca/?p=58#content.

Be the First to Share

    Recommendations

    • Toys & Games Contest

      Toys & Games Contest
    • Make it Real Student Design Challenge #3

      Make it Real Student Design Challenge #3
    • Arduino Contest

      Arduino Contest

    5 Comments

    0
    masoon
    masoon

    9 years ago on Introduction

    what's the carabiner and string for? Do you have a version of this instructable with instructions?

    0
    murray484
    murray484

    Reply 9 years ago on Introduction

    The carabiner and string is a safety system. If you look at the second picture, you will see that there is a second rope above the main rope. One carabiner is attached to the camera strap, and the other is clipped onto the safety line. This is to keep the camera from hitting the ground should the main line break.

    I do not have a full instructable, however on my blog, I have a detailed walk through with a list of all of the materials and descriptions of each part of the system. Here is the link: http://colvins.ca/?p=58#content.

    0
    masoon
    masoon

    Reply 9 years ago on Introduction

    Ah ha! I never would have figured that out. That's a thoughtful design. I thought it was to stabilize the whole mechanism. Thank you for taking the time to answer my question. And thanks for the link!