DIY DRONE (HOMEMADE)

Hi everyone

Welcome to my first instructables

Today I will guide you out by making a simple homemade quadcopter which you can easily build at home

So lets get to work

Step 1: BOM : BILL OF MATERIALS

Lets start with the things that we

will need

Quadcopter frame

1000 kv brushless motor

30amp esc

Power module for quadcopter

Shock absorber for flight controller

APM 2.8 Flight controller

Transmitter – CT6B

Reciver module

Quadcopter propellers

And some soldering skills

Step 2: STARTING WITH THE FRAME

Step 3: ​ASSEMBLING THE MOTOR AND ELECTRONICS

Assemble the motors on the frame as shown in the pictures

Now start assembling the esc start by cutting down the t connectors of the esc and solder them on the frame as shown above.

Now connect the motors with the ESC and start assembling the power module along with flight controller

Step 4: Establishing Wireless Connections

Now connect the receiver module with the flight controller (it’s easy everything is well instructed on the Flight controller itself !)

NEXT grab a batterypack and put it on its place and do not forget the propellers !!!!!

Step 5: ​Now Try Touching the Sky!!

Congrats!!!

You are welcomed to the world of flying!!!