DIY Flex Sensor

A cheap way to flex sensor. It will be very useful for your projects

Step 1: Things Needed :

flexible tube
LED(any colour)
LDR(light dependant resistor)

Step 2: Join It

Fix one of the tube with LDR and another end by LED.
Supply power to LED.
when you bend the tube the resistance changes at LDR with respect to luminance of LED.

Step 3: Interfacing to Arduino

It gives voltage as output thus it is connected to analog pin.

Step 4: Watch Video

https://youtu.be/dDIQJa4xseY

Comments

[fahmi 2008]

what is the ideal flexible tube length?

[kolkoli]

good project.

[ensarlevent]

oh, its a very good idea

[PiotrS]

Awesome idea m8. das a sunlight and other light sources interfere a lot ? and if so have you tried putting it in a black shrink tube or painting it black ?

[RajasekarA2]

yes it does affected by other luminance source which is greater than LEDs luminance and your idea will be helpful for it.