DIY Four-leaf Clover in Resin
Intro: DIY Four-leaf Clover in Resin
Things required are listed below
1)Resin
2)Sand paper
3)Four-leaf clover
4) flat plastic piece (for mould)
5)car polishing past (or) any polishing past
6)Weight machine
7)Burner
8)Holder
STEP 1: Preparation of Mould
We prepare mould as per required dimensions.here ihave taken rectangular mould as shown in figure
STEP 2: Preparation of Resin
I have taken 20 gram of Resin and 8 grams of hardener
pour this in half of the mould
pour this in half of the mould
STEP 3: Placing Four-leaf Clover in Mould
Four-leaf clover is placed in the mould with the help of holder
STEP 4: Filling Another Half of Mould
Fill another half of mould with Resin as show in above fig
STEP 5: Remove Outer Plastic Parts(mould)
when resin gets hard Remove the outer plastic (mould) by heating as shown in figs
STEP 6: Shape With Sand Paper
After removing outer plastic parts (mould) we have to get it to required shape by 1) gritty sandpaper 80
2)we snad paper with water
Grading 360,600,1000,1500,2000
2)we snad paper with water
Grading 360,600,1000,1500,2000
STEP 7: Polishing
we using the car polishing past
6 Comments
StephanieD94 5 years ago
aplsms 6 years ago
Plagiat?
The fastest indian 6 years ago
Hi Friend,
This comment is not to offend you!
But instructables is a place to share what you make! The content should be original. You just can't take screen-shots from a popular youtube video and make a description to post it here. It would be nice if you try it out yourself and upload the pictures of your version of what you saw in that video.
But these pictures are just screen-shots from the Youtube video
Atleast you could have mentioned in the introduction that this is a guide to that youtube video. Give credits to the original author mate. Makers spend a lot of time making these things. Don't get offended. Share what you make. You'll get all the support from the readers!
Captain Tight-Pants 6 years ago
NICE!
Jetsom 6 years ago
We made similar paper weights as an art project when I was in primary school... 25 years later it's still standing on my desk! This is a fantastic way of showing off something as unique as that four leaf clover. Nicely done!
Mechanical bro 6 years ago
Thank you