DIY Haunted House

1,682

25

2

Introduction: DIY Haunted House

This Haunted House was created using a kit from SVG Cuts.
It has two areas for storing surprises or treats. The roof in the front lifts off to reveal a storage space. The back opens down to fill with lots of fun things.
I started by cutting all the pieces. I embossed panels in the front for added texture.
I distressed all the pieces with Tsukineko pigment inks.
I added some additional distressing with white paint.
I filled it with my favorite candies.


Papercraft Contest

Participated in the
Papercraft Contest

Be the First to Share

    Recommendations

    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge
    • Tinkercad to Fusion 360 Challenge

      Tinkercad to Fusion 360 Challenge
    • Stone Concrete Cement Contest

      Stone Concrete Cement Contest

    2 Comments

    0
    sunshiine
    sunshiine

    8 years ago on Introduction

    I like this one also but my favorite is the castle. thanks again for sharing!

    sunshiine

    0
    JavaJoan1
    JavaJoan1

    8 years ago on Introduction

    Another wonderful project!! Your work is so detailed and nicely done!