DIY 90 Degree Image Erecting Prism Diagonal for Homemade Refractor Telescope

By in CircuitsCameras

1,561

1

Introduction: DIY 90 Degree Image Erecting Prism Diagonal for Homemade Refractor Telescope

By

DIY Image Erecting Prism Diagonal for Homemade Refractor Telescope

If you look through your telescope with the standard mirror or star diagonal installed, you will notice that objects may be either upside down, flipped so that you see a mirror image, or a combination of the two. This is fine for observations of celestial objects, but it can be a little confusing when you are trying to track a car as it moves through the street
This is an easy problem to correct. Simply remove the standard diagonal from the telescope’s focuser or visual back,Image Erecting Prisms prism diagonal is very comfortable for daytime observations, where the telescope is often in a horizontal position. and i can do it in home with Image Erecting Prisms take from old binocular broken , very cheap and easy

More Homemade Refractor Telescope DIY Erecting Prism Binoviewer Focuser here:

Be the First to Share

    Recommendations

    Rubik's Cube Solver
    Rubik's Cube Solver by aaedmusa in Gadgets
    116 17K
    Laser-Cut Infinity Dodecahedron (Fusion 360)
    Laser-Cut Infinity Dodecahedron (Fusion 360) by thomasj152 in LEDs
    179 15K
    Pingo, the Secret Color Clock by Illusionmanager
    Pingo, the Secret Color Clock by Illusionmanager by illusionmanager in Clocks
    1 39 3.6K
    A Pocket Sundial From a Broken Pocket Watch!
    A Pocket Sundial From a Broken Pocket Watch! by JGJMatt in Metalworking
    86 8.2K

    • Make It Bridge

      Make It Bridge

    • Big and Small Contest

      Big and Small Contest

    • For the Home Contest

      For the Home Contest

    Comments