DIY Leather Bracelet

19,128

102

1

Introduction: DIY Leather Bracelet

About: Hi there! I started this profile to share my DIY creations and to inspire you to make cool stuff. Here I will publish my DIY creations, videos, tips and tricks, secrets of fixing stuff. http://inspiretomake.…

In this tutorial, I'll show you how to make a simple but cool looking leather bracelet. All you need is a strip of leather and some flat metal washers.

Step 1: Leather Strip

I made my strip out of a leather couch sample. It was not long enough to cut a single 2ft strip, so I cut multiple strips and glued them together.

Strips should be a little wider than the washer hole.

Step 2: Putting the Bracelet Together

First, put 2 washers on the strip. Live a couple of inches at the end.

Feed the longer end of the strip through the top washer, and feed it back through the bottom one.

Continue this pattern by adding more washers on the strip.

Step 3: Make a Buckle

I made my buckle out of the same washers.

Find the end of the bracelet where the leather strip is looking up. Feed 2 washers on this end and loop it on the last washer.

Step 4: Other Options

You can also make this bracelet with paracord or a polyester strap.

Step 5: Enjoy Your Bracelet

And don't forget to visit my Youtube Channel to see more DIY projects like this.

Be the First to Share

    Recommendations

    • Micro:bit Contest

      Micro:bit Contest
    • Retro Tech Challenge

      Retro Tech Challenge
    • Robots Contest

      Robots Contest

    Comments

    0
    sudeeppatel728
    sudeeppatel728

    Question 1 year ago

    I am from India and I have watch your YouTube video about this leather and washer bracelet but in video you had said that the washer hole size is a 12mm so i tried to find it but i didn't find the washers that you have seen in video so can you give me any link that i can buy it online.