DIY Mini H-Bridge for Arduino

Introduction: DIY Mini H-Bridge for Arduino

Step 1: Part List, Circuit and PCB

Small H-bridge for two direction motor control with arduino.

Designed for breadboard use.

Part list:

- L9110S SMD motor driver IC

- 0805 1K resistor (2x)

Description:

Motor connected to the M+ and M- pins.

Motor powered on the MVcc pin with external battery (or from arduino 5v)

The external battery gnd is common with arduino.


The L9110S controlled on I1 and I2 pin.

If I1 input high, M+ output high, M- outputlow. (motor turn one way)

If I2 input high, M+ output low, M- output high (motor turn another way)

Have fun.

Be the First to Share

    Recommendations

    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest
    • PCB Challenge

      PCB Challenge

    4 Discussions

    0
    JoelLeNoir
    JoelLeNoir

    5 years ago

    Nice motor driver. I would very much like to have a dual motor driver. Would you be willing to help create a dual driver board?

    0
    ibenkos
    ibenkos

    6 years ago

    Smart idea! Thanks for shearig :)

    0
    jueljp
    jueljp

    6 years ago on Introduction

    Thanks for shaing, that will go on my new creppy robot

    0
    planetleak
    planetleak

    Reply 6 years ago on Introduction

    Thats great, good luck with your robot. I will use it with a little modification on my first arduino quadcopter.