Introduction: DIY Motor Boat
Hi i am Rohith gowda.v from Banjarapalya Makerspace i am making a boat you want see who to make a dutiful boat using trash items.
TOOLS
1, Bio foam sheet
2, 1 motor
3, 9v battery
4, 1 fan
5, Battery cap
Step 1: Cut the Cardboard
Cut the cardboard and fix it as shown in the image.
Step 2: Fix the Fan
fix the fan as shown in the image.
Step 3: Connect the Wire
Connect the wire to the motor and switch as shown in the image.
Step 4: Fix the Motor and Battery
Fix the motor using bottle cap and hot glue then fix the battery as shown in the image.
Step 5: The Project Is Compleated
Finally you done the DIY Boat.
11 Comments
3 years ago on Step 5
Nice job
5 years ago
Very Nice Project !
6 years ago
great project, congratulations! I may use some of your ideas regarding the boat itself... Thanks for sharing.
7 years ago
thnx it was awesome for my science project, what else can be used instead of hot glue?
7 years ago
looks great. What is the glue that you have been using to glue the sides of the boat?
Reply 7 years ago
hot glue ! http://www.amazon.in/All-Purpose-Melt-Glue-Sticks/dp/B00YENG25G?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=d4ca2642-3080-4db3-a39f-cc8b22bb0a5c
Reply 7 years ago
tnx, i suspected that already :-)
7 years ago
thank you very much for sharing this instructable Rohith gowda.v!
I'll certainly leverage from your work to build a boat like this for my sun.
7 years ago
buen trabajo! sigue así! ?
7 years ago
This is such a cool little boat! Thanks for sharing
Reply 7 years ago
Great homemade boat