DIY Motorized Fidget Spinner! (Contest Entry)

22

1

Introduction: Null

About: Hi I'm Angelo (TechBulder)! I am an engineering major in BS-ECE at the DLSU. I use my course as an inspiration for making my current projects! I've been posting projects here ever since I was 10. I also run a …

It most probably crossed your mind to attach a motor and a battery inside a fidget spinner. Today we are making a DIY Motorized Fidget Spinner! A spinner that would spin +1000rpm for 10 minutes until the battery runs out! The design is pretty straight forward. I 3D Printed a scaled fidget spinner then we took apart Brushless 5V Fan, removed the supports and blades. Afterwards I hooked up a tiny low profile lithium battery and a switch to power and activate the motor. When the switch is pressed, the spinner would now run continuously at +1000rpm until the battery runs out! THINKERCAD RULES! View my full Instructable tutorial at (https://www.instructables.com/contest/fidgetspinner/design/DIY-Motorized-Fidget-Spinner-1/) _________ VIDEO DEMO (https://youtu.be/2_wmkS_7kaw)

Fidget Spinner Design Contest

Participated in the
Fidget Spinner Design Contest

Be the First to Share

    Recommendations

    • Toys & Games Contest

      Toys & Games Contest
    • Furniture Contest

      Furniture Contest
    • Big vs Small Challenge

      Big vs Small Challenge

    Comments

    0
    GasterBlaster186
    GasterBlaster186

    3 years ago

    thats pretty cool havent seen any one do that yet

    xVXkXDzm.jpeg