DIY Peg Mini-Gun

59,357

101

49

Introduction: DIY Peg Mini-Gun

Make a very simple mini-gun from a regular clothes-peg. You can do it in few minutes. The gun is quite powerful and can shoot up to 5 meters. Be careful and don't shoot into living creatures.

Step 1: What You Need

- clothes-peg
- knife
- file (not necessary)
- thread
- toothpick (as a bullet)

Step 2: Disassambling the Peg

Disassemble a peg and cut with a knife red parts as shown on the pictures.

Step 3: Cutting a Gunpoint

With a file make two furrows in the peg parts. They will create a gunpoint.

Step 4: Assembling the Gun

Join two parts of a peg with a thread (or any rope or tape) and insert spring as shown on a picture.

Step 5: Ready to Shoot

Cock a gun as shown, insert a toothpick and you are ready to shoot.

Be the First to Share

    Recommendations

    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest
    • Modify It Speed Challenge

      Modify It Speed Challenge

    49 Discussions

    0
    Jetmaster360
    Jetmaster360

    4 years ago

    The "gunpoint" would actually be a barrel, just sayin'

    0
    djduckman
    djduckman

    7 years ago

    Wow how did you come up wiv that

    0
    bcavaciuti
    bcavaciuti

    7 years ago on Introduction

    ive made these before and made needle darts by stripping the ends of an earbud (one with a hollow stick) and wrapping the pin in masking tape before inserting into the earbud stick with a lot of glue...these were quite effective...possibly could be used to administer poison.

    0
    lholder
    lholder

    7 years ago

    Koooool!!

    0
    Gigodorias
    Gigodorias

    8 years ago on Introduction

    Yes. It is possible to make one of these that shoots out of the pointed end instead of the blunt end. Just reverse the firing mechanism. I don't really know if it is more efficient. Personally I would be fine with either one. I would probably want a plastic/rubber grip around the whole thing, except for the mechanism. Make it look like a REAL ballistic knife by painting the thing a dark grayish tone, adding a more concealed/realistic look.

    0
    jacobstark11
    jacobstark11

    8 years ago on Step 2

    I found that if you extend the peg by cutting it a little longer you a slight bit more of power and range. due to the fact that your trigger (spring) has a little bit more time to speed up propelling your projectiles (tooth pick or matchs). you can always try this and experiment with it

    0
    ualcala
    ualcala

    9 years ago on Step 3

    where do you get the files

    0
    mezon
    mezon

    9 years ago on Introduction

    Link to the video how to make it:
    http://www.youtube.com/watch?v=nb9W3DrXV_k

    0
    yoshi1
    yoshi1

    9 years ago on Introduction

    Dam! I stuffed up, instead of putting the gunpoint where it is in the pictures i put it the opposite.
    Will it still work and how do you put the spring on?

    0
    Apple_4_life
    Apple_4_life

    10 years ago on Introduction

     great instructable!!! wish i had some clothes pins to make it though... :'(

    0
    venom52
    venom52

    12 years ago on Introduction

    This is awesome I just made one mine shoots nails.

    0
    venom52
    venom52

    Reply 12 years ago on Introduction

    It shoots nails 15 feet and straitened paper clips 20 feet .

    0
    xava100
    xava100

    Reply 11 years ago on Introduction

    I agree with Hel_Guardian if its a different design put it up