DIY Pirate Ship Playhouse

2,185

19

2

Introduction: DIY Pirate Ship Playhouse

Me and the kids (3 & 5) had a look online at playhouse ideas and had decided we would build a pirate ship! Funds were running a little short after a major garden revamp and after promising the kids a playhouse I didn’t want to be a bad dad!

Step 1: Sourcing the Materials

Searching Facebook I found a local sawmill selling wood as seconds basically to save space in their skips. So I took the car round loaded it up and paid the guy the £20!

Step 2: The Design

Pirate ship in mind plus the limited space we had we came up with a sketch! Pirate ship on stilts (roughly)

Step 3: Building

Then work took place, built a pirate bar first which was missed off the sketch but we had the timber to do it!

Then on with the pirate ship and access stairs and finishing the decking around the bottom of the ship.

Step 4: End Result

Voila! The nearly finished product (needs a sand and a lick of paint)

Step 5: Finally Got Round to Painting It

Outdoor Structures

Participated in the
Outdoor Structures

Outside Contest 2017

Participated in the
Outside Contest 2017

First Time Author Contest

Participated in the
First Time Author Contest

Be the First to Share

    Recommendations

    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest
    • Lamps Challenge

      Lamps Challenge
    • Rice & Grains Challenge

      Rice & Grains Challenge

    2 Comments

    0
    secretshedfreak
    secretshedfreak

    5 years ago

    £20 for a boot full of timber, well played mate! where about in the UK is the saw mill?

    0
    Swansong
    Swansong

    5 years ago

    That's really fun! I'm sure the kids love it :)