Introduction: DIY SMOKER EASY AND CHEAP
I built my smoker using two plant pots the burner inside is a stainless steel bucket and the exterior wood pot in is made of old pallets
Step 1: 2019 It Run
December 2019 it's smoke the salmon filet for last night of the year
26 Comments
5 years ago
Just few cm from the bottom of the pot only to avoid crak in the pot (not hi quality pot)
5 years ago
This is a really good idea ! can you explain to me where you put the stainless steel bucket ? it goes under the plant pot ?
Thank you !
8 years ago on Introduction
This same idea could be used to build a wood steamer for bending wood. An electric tea pot could be placed under the flower pot with the box on top used to hold the wood items You want to steam bend. Of course, the box would have to be built to fit Your wood items. Great idea!!
Reply 8 years ago on Introduction
to steam wood for bending, you might consider pvc pipe with a few fittings - assuming you are bending longer, narrow strips.
Reply 8 years ago on Introduction
great Idea! thanks
Paolo
8 years ago on Introduction
Do you have a detailed instructions list and materials list for this and how each section of this works? I'd really like to build one of these.
Reply 8 years ago on Introduction
No I only take a look to a kamado smoker (green egg) than I take a look to material I have in mt backyard .... I decided to smoke half salmon at time .... than I build it!
P
8 years ago on Introduction
What are the actual instructional steps/material list etc?
8 years ago on Introduction
three metal plates allow air circulation inside the pot
8 years ago on Introduction
Hi! Nice smoker! What are those metal plates inside a pot in the the pic number 7?
8 years ago on Introduction
Dear Williams old pallet only for the external box of the two pot
the smoke chamber is genuine pine wood.
The steel inox pot with opportune holes and grid was put on the little pot and than over the the silver things inside the first pot.
Nnot fixed only put on
8 years ago on Introduction
There has to be photos missing here, what are the silver things inside the first pot and how does the steel pail fit in it?????
Reply 8 years ago on Introduction
I would have made the smoker box out of NEW cedar wood not used pallets that could have god knows what has spilled on them over the years.
9 years ago on Introduction
Is the smoke box made of "old pallets"? Those are heavily saturated in pesticides. I wouldn't normally say anything but when it comes to cooking.....
Reply 8 years ago on Introduction
the smoking box is natural wood not treated
Reply 9 years ago on Introduction
The pallet wood is only for aesthetic ... the cooking (somking) chamber is only ceramic
Paolo
Reply 9 years ago on Introduction
Ah gotcha. So this is more of a cold smoking?
Reply 9 years ago on Introduction
yes, the smoke is really cold. The smoke chamber in winter reach 16°C.
9 years ago on Introduction
Hey, looks great. Are there any instructions?
10 years ago on Introduction
do you do more than one tier when you're smoking?