DIY WALLET
Intro: DIY WALLET
!!!
STEP 1:
Cut 2 identical medium pieces of duct tape
STEP 2:
Lay the 2 pieces of tape down on a surface. Then fold one on top of the other smoothly. Repeat this 3 times.
STEP 3:
Here is what it should look like after repeating step 2, 3 times.
STEP 4:
Push the 3 sets of tape together, then cut tiny pieces of tape to tape the 3 sets together.
STEP 5:
This is how it should look like when the 3 sets are taped together.
STEP 6:
Fold it in half and cut a little piece of tape. Tape the little piece to the side of the folded wallet to close the spaces on the side.
STEP 7: This Is How to Close the Space
STEP 8: This Is How the Closed Side Should Look Like
STEP 9:
Cut another piece of tape and cut it down the middle to wrap around the wallet, separating it into 2 pockets.
STEP 10:
This is how the 2 pocket wallet should look like.
STEP 11:
Final product