DIY Water Pump or Valve Auto ON-OFF | Make Water Level Controller at Home

Introduction: DIY Water Pump or Valve Auto ON-OFF | Make Water Level Controller at Home

About: Robotic Projects (Arduino, Raspberry Pi, ESP8266, PCB, IoT, 3D, Electronics)

Hello friends, in this video I will show you Very Simple and Amazing Project. It really simple and easy to make it at your home. DIY Water Pump or Valve Auto ON-OFF | Make Water Level Controller at Home. Order this project from PCBWay - http://bit.ly/2kxA4QD

Get 10 PCBs for Only $5! PCBWay - https://www.pcbway.com

Step 1: Video Tutorial - Step by Step

Required Hardware for this project:

Water Pump 12V - http://bit.ly/2m0IksI

Solenoid Valve 12V - http://bit.ly/2kxCfUc

Relay 12V - http://bit.ly/2kA70b4

Diode 4007 - http://bit.ly/2k9HWHY

Transistor BC547 - http://bit.ly/2kpeZbd

Resistor 1K - http://bit.ly/2lJhi8Z

Adapter 12V - http://bit.ly/2m2GCHj

Battery Connector - http://bit.ly/2lEhoPk

Wires - http://bit.ly/2kAu9dF

Wire Connector - http://bit.ly/2lEgy58

Tube Hose - http://bit.ly/2k5qnbU

Soldering Tool Kit - http://bit.ly/2D6YbuC

Four Arms Soldering Station - http://bit.ly/2kygjsc

Banggood 13th Anniversary Sale - http://bit.ly/2kmNIpP

Step 2: Order PCB From PCBWay

In this project, I have choosen PCBWay. PCBWay is the only way to make this project happen a very low cost and high quality.

Order this project from PCBWay - http://bit.ly/2kxA4QD

Be the First to Share

    Recommendations

    • Hide It Challenge

      Hide It Challenge
    • Tiny Things Speed Challenge

      Tiny Things Speed Challenge
    • Reclaimed Materials Contest

      Reclaimed Materials Contest

    Comments