DIY Agenda Book Ereader Case
Intro: DIY Agenda Book Ereader Case
I made my own ebook reader case with a 5$ agenda in a very easy way. At first sight it looks like a workbook.
STEP 1: Supplies
Supplies in the picture shown are:
- Ebook reader (this is a Nook)
- Agenda book
- Cutter
- Pencil
- Wood glue
- Metal ruler
- Ebook reader (this is a Nook)
- Agenda book
- Cutter
- Pencil
- Wood glue
- Metal ruler
STEP 2: Glue the Sides
Put wood glue along all the sides. Then spread it with a cloth or a napkin.
Try to separarte the sleeves, so glue can enter between them.
Let it dry under a pair of heavy books.
Try to separarte the sleeves, so glue can enter between them.
Let it dry under a pair of heavy books.
STEP 3: Measure and Mark
Measure your eReader and mark the cutting lines at the first page using a pencil.
STEP 4: Cut
Using the cutter, and helped by the ruler, cut the glued pages carefuly. Do this in several steps, removing the loose pages and cutting again. You must cut the corners in all directions.
STEP 5: Done!
Case done!
14 Comments
mastermakoko 11 years ago
phant0m_sp00f3ra 13 years ago
chimpinho 13 years ago
Really, I thought this could be a good way to recycle old books, but I have not, so... I bought one. It would be better with an old look, but more expensive, too.
kevio 11 years ago
pleitz 11 years ago
chimpinho 11 years ago
rachelmaryb 12 years ago
miso_soup 12 years ago
bulletkid 12 years ago
samaside 12 years ago
chimpinho 12 years ago
thesoberpirate 13 years ago
chimpinho 13 years ago
I put a plastic sheet beteen the first cover and the first page. The plastic sheet was the envelope of the book, but you can use any other. The back cover (and this is another thing I missed) have to be glued to the last page, so you must glue all the page, not just the side but the complete page.
Thanks for the comment, I hope your question is answered.
klhathaway 13 years ago