Introduction: DIY Bike-light System
More by the author:
About: We're just a couple of guys who decided to combine our nerd powers for the purposes of showing people how to make awesome stuff.
Equipment used:
Soldering iron and solder
Hot glue-gun and glue
Parts you'll need:
Thin cardboard, or poster-board
5 super bright white LEDs
5 super bright red LEDs (or standard LEDs if you don't have cheap/free acess to super brights. I scavennged all of my parts except the resistors)
2 220Ohm resistors
1 9 volt battery
something to mount it into like a toy-egg like I'm using
Optional:
Aluminum foil tape
see video for assembly instructions.
Thanks for checking out our first instructable and DIY video!
-Unseen Legions DIY
Soldering iron and solder
Hot glue-gun and glue
Parts you'll need:
Thin cardboard, or poster-board
5 super bright white LEDs
5 super bright red LEDs (or standard LEDs if you don't have cheap/free acess to super brights. I scavennged all of my parts except the resistors)
2 220Ohm resistors
1 9 volt battery
something to mount it into like a toy-egg like I'm using
Optional:
Aluminum foil tape
see video for assembly instructions.
Thanks for checking out our first instructable and DIY video!
-Unseen Legions DIY
Participated in the
Battery Powered Contest
Participated in the
Epilog Challenge V
Participated in the
Bikes and Wheels Contest
