Introduction: DIY Bottle Out of Very Common Stuff in Your House.
Can't find a bottle of water? Or just feel like making something creative and cool? Well, here is where you will find out how to make a "bottle" out of extremely common stuff in your house !
Step 1: Materials Needed
Here are the materials needed to make your bottle:
-A pair of Sizors (optional) - Pic 2
-A cup (any size) - Pic 3
-A straw - Pic 4
-Kitchen transparent wrap - Pic 5
-An elastic (a nice thick one will do great)
***REMEMBER!!! Put whatever liquid you want (i.e., water) before you do anything!***
Step 2: Putting the Wrap On
Now, first place the wrap on the top of the cup you are using.
Then, squish the wrap on the side of the cup so the top of the cup has sort-of-smooth wrap on it.
Step 3: Putting the Elastic On
Put your elastic around your "bottle" about 1-3 inches away from the top, holding the kitchen transparent wrap on the cup.
Make sure the elastic is not all curled up, if it is, make it show only the one side.
Pull down on the elastic to make the wrap on the top of the cup smooth.
Step 4: Inserting the Straw
Gently poke a hole in the wrap on the top of the cup with your straw.
Step 5: Cutting Off the Excess Wrap (optional)
With the sizors, cut the excess wrap off of the side of the cup about an inch or two below the elastic.
***This step is optional***
Step 6: Yay! Your Done Now! :D
This is my first instructible. This is what it should turn out looking (also shown in the intro)...
Hope you like it!
Participated in the
Green Living & Technology Challenge