Introduction: DIY Emergency Mic for Pc and Laptops
It's so easy,
let's begin.
Step 1: Soldering and Gluing
you will need ....
01. 3.5mm audio jack (male)
02. Copper coil
03. Condenser Mic (radio shack)
04. Soldering iron
05. Hot glue gun
Step 2: You're Done !
see you with another instructable..
thank you...

Participated in the
Makerlympics Contest
6 Comments
8 years ago on Introduction
I don't really see the advantage of this. Could you explain for me?
Reply 8 years ago on Introduction
suddenly your pc mic was breakdown . you can use this gadget.. and just for fun.. :D
Reply 8 years ago on Introduction
But it's not that much cheaper than a cheap mic, and you are more likely to be able to get a cheap mic than to build this. It's kind of a mislabel. You usually don't have a soldering iron in an emergency
Reply 5 years ago
Well that's not exactly true. It's hard to say what tools someone would have in an emergency. I would have a soldering iron 80% of the time. This is a good example of using what you may have on hand to fix a problem until you can get a proper replacement. I'm making one now, with a soldering iron, do to an emergency.
8 years ago on Introduction
cool,i would try
Reply 8 years ago on Introduction
Thanks..