Dirt Cheap Rubber Band Gun
Intro: Dirt Cheap Rubber Band Gun
Rubber band gun is a great toy. There are many models - from single-shot to full automatic machine gun. I recently had a takeaway meal which came with disposable chopsticks.
I made a decent rubber band gun by the chopsticks and some rubber bands.
The cost? A few rubber bands.
I made a decent rubber band gun by the chopsticks and some rubber bands.
The cost? A few rubber bands.
STEP 1: Material
1. Four chopsticks - you may use sticks of similar length such as pencils. Straws are not tough enough.
2. 10 to 20 rubber bands
2. 10 to 20 rubber bands
STEP 2: Cut the Chopsticks
1. The first chopstick - the trigger, the barrel and the front site.
2. The second chopstick - the grip.
3. The third and forth chopstick - the barrel.
2. The second chopstick - the grip.
3. The third and forth chopstick - the barrel.
STEP 3: Putting Them Together
When they put together, the gun should look like this.
STEP 4:
Tie the front sight and the barrel by the rubber bands. The tie must be tight as the stress will be quite large on them.
STEP 5: Make the Grip
Make a triangle grip. Again, tie them by the rubber bands.
STEP 6: Finally, the Trigger.
Again, tie the trigger by a rubber band.
STEP 7: Load the Weapon
Load a rubber band between the front sight and the trigger.
Pull the trigger and fire the rubber band.
It can easily shoot to over 20 feet.
Click here and see how I killed a couple of flies by this gun.
Pull the trigger and fire the rubber band.
It can easily shoot to over 20 feet.
Click here and see how I killed a couple of flies by this gun.