Introduction: Doesbot D1-3D Printer Assembly Tutorial
My name is Ding Qi, from Zhejiang province China. This is my first 3D printer.
Contact :http://www.doesbot.com/
Step 1: Screw Assembly
Step 2: The Bottom of the Platform Assembly
Step 3: XY-axis Platform Assembly
Step 4: Z-axis Platform Assembly
Step 5: Total Assembly
Step 6: Install Circuit Board
Switching power supply: 12V 240W
3D printer control circuit: RAMPS_1.4 http://reprap.org/wiki/RAMPS_1.4