Introduction: Double Cross Fishtail Using Cray-Z-loom
I will be using the cray-Z-loom today, but any other loom works too..
Step 1: Take Your First Color of Rubber Bands
sorry if the pic is upside down
Step 2: Place Your First Color Anywhere on the Loom in a Crazy Eight
sorry if it's upside down
Step 3: Then Take Your Next Color
Step 4: Place Your Next Color Diagonally in a Figure Eight
Step 5: Place Your First Color Straight on Top of the Same Color Figure Eight
Step 6: Do the Same With Your Other Colour
Step 7: Repeat the Two Previous Steps So That There Is Three Bands on Each of the Four Pegs
Step 8: Now Take Your Hook
Step 9: Hook All of the LAST Bands on Each Peg So That Your Loom Looks Like This.
Step 10: Repeat Putting on Bands and Hooking So That Your Bracelet Looks Like the One in the Photo
make sure when placing your bands that each peg has three bands on each, not two, not four, not one. When finished, you may take the bracelet off the loom. C clips are recommended. Have fun!