Introduction: Double Double Loom Bracelet.
My very own self made double double loom bracelet!
Step 1: Materials
You need:
- loom bands
- loom board
- hook
- s or c clip (sorry I don't have c clip)
Step 2: Placing the Bands
Put two rubber band twisted into an 8 shape and place it in the two pegs.
Step 3: Placing....
Add two another color of rubber bands.
Step 4: Looming....
Take the bottom twisted rubber bands and place it on the top.
Step 5: Looming....
Do the same to the other side.
Step 6: Looming....
Add a double rubber band on the top.
Step 7: Looming....
Pull the bottom rubber band and place it on the top. But don't take the other side!
Step 8: Looming....
Add a double rubber band.
Step 9: Looming....
Take the middle rubber band and place it on the top. Then take the bottom rubber band and place it also on the top.
Step 10: Looming...
Add another double rubber band.
Step 11: Looming....
Take the middle rubber band, take the bottom rubber band.
Step 12: Looming....
Continue doing it until it looks like this.
Step 13: Locking.
Add a double rubber band.
Step 14: Locking.
Take the middle and bottom rubber band.
Step 15: Locking.
Do it on the other side.
Step 16: Locking.
Release the rubber band from the pegs and put the lock on it.
Step 17: Finish Product!
So this is the finish product. I hope you learn how to make my double double loom bracelet! :))) that's a self made, I'm the one who discovered that.
So thankyou!!! :*
1 Person Made This Project!
MagicalPerson2990 made it!
Recommendations
Make It Bridge
Game Design: Student Design Challenge
Big and Small Contest
2 Comments
8 years ago on Introduction
Super job!
8 years ago
That is a very pretty bracelet!!!