Draft Desk Upgrade

Introduction: Draft Desk Upgrade

This is a tiny bit more technical. I set the right angle to start. The ladybug is my ashtray. using reclaimed wooden pallets, and a little help from my plant "roadie" The screws are pre drilled and metal L was used underneath. The angle was pencil scribed and the offcut is mounted along the back rail down to keep the shelf from sliding. 100% of cut to length wood was used, correct angle! And bragging along it is level to a glass of wine. The pink elephant is named "kisser" and helps me with the plants. Uploading from this phone has been an issue, VOTE here!

Before and After Contest

Participated in the
Before and After Contest

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    3 Discussions

    0
    ConwayA
    ConwayA

    5 years ago on Introduction

    The angle of the desk is set to where a paper stops sliding off the table. The shelves are level to that, free standing. I like how it keeps the composition books side stacked.

    0
    tomatoskins
    tomatoskins

    5 years ago on Introduction

    How did you attach your right angle shelves to your draft table?

    0
    ConwayA
    ConwayA

    Reply 5 years ago on Introduction

    I didn't they sit up there. They are removable. I forgot to mention I am giving them a bondo coat now. Then they will be primed. next I will paper them with a green hue graph paper and seal it with clear. The green hue graph paper will match my table mat.